Our
Wilbers-PA
solution maybe is the most comfortable way to adjust the spring preload. Using a hand knob that comes with a bracket specified for your motorcycle, you can easily adjust the riding level to match additional passenger and/or loading situations. The adjustment range is 10 mm.
The X-PA offers you the option to regulate the spring preload and therewith the vehicle level by the included box spanner in a breath. The purely mechanical adjustment mechanism is very light and, due to its robustness, best suited for enormous loads. The adjustment range is 15 mm.
The ZF-PA is a hydraulic spring tensioner that is directly integrated on the shock absorber. The advantage is that you do not have to mount an external hand knob to the vehicle. Nowadays especially current motorcycle models rarely offer space for a separate had wheel. Easily reachable and adjustable without much force, this preload option can be tuned for up to 15 mm.
The
E-PA is an electrohydraulic spring preload. This system is exclusive to our WESA-X shock absorbers. Using the control unit of the WESA-X system, you can adjust the seating level at the push of a button to different loading situations in 5 steps.
Ohne_Titel_1
With
the Wilbers ride-height-adjustment the length of the shock absorber can be modified over a thread located at the lower shock mount for +/-5mm. Normally this is possible while the shock absorber is installed.
Depending on the type of the motorcycle, the seating height can be adjusted for up to +/-15mm. This is for example useful on the racetrack to influence the caster and therewith the steering behavior of the motorcycle.
Generally, the vehicle has too much damping in the fork, but too little in the shock absorber. This leads to a loss of direct driving feel.
Originally, linear fork springs were mounted in the fork. These have been replaced by progressive fork springs at Wilbers, which leads to a much better response in the beginning and offers more reserve in the second, harder spring rate than the stock. With simultaneous adjustment of the fork oil and the air chamber, the general setting was optimised here.
The suspension geometry on the front and rear axle was sensibly adjusted via the negative spring deflections.
Originally, the vehicle had slightly too much negative spring travel. By making the shock absorber minimally shorter, the seat height remains as original.
In addition, the rebound and compression damping has been optimised.
This results in a better ride and better handling, which also contributes to a safer ride.
Ecoline 540 Mono Road Ø 46 mm
The well priced alternative.
Stepless adjustable spring preload by using the included spanner tool.
With the radial-piston and the progressive shim-package youll always get the optimal damping.
High-quality, maintenance-free spherical plain bearings bearings promise long and healthy life.