You have questions or special requests? We are happy to help you! +49 (0) 5921 727170
1. Select vehicle type
Motorcycle
2. Select manufacturer
Harley-Davidson
3. Select model
Pan America | RA1
4. Select year of manufacture
2021
Please complete the selection
You are here: HomeMotorcycleHarley-DavidsonPan America | RA1
back to product overview

shock absorber type 640 Road

Art. No.: 640-1326-00

Originally, the fork had linear fork springs. These have been replaced by progressive fork springs, which leads to a significantly better initial response and offers more reserve in the second spring rate than the series. On the rear shock, the spring rate is adjusted via a slightly stiffer spring, in combination with optimised rebound and compression damping.
The suspension geometry on the front and rear axle was sensibly adjusted via the negative spring travel. Originally, the vehicle had somewhat high negative spring travel. These were adjusted by a minimally shorter suspension strut, so that the original seat height is retained.
This results in better driving behaviour and better handling, which also contributes to safe driving behaviour.

The basic edition of the Wilbers Adjustline mono shock absorber comes along with the same technology as the more complex versions. The difference is that here we leave out the compression reservoir and thus the options for adjusting high- and low-speed compression. Nonetheless this shock absorber does not make any compromises concerning response behavior or durability. The radial piston, wet run, teflon guided self-aligning bearings and other features redefine the quality of a standard shock. Like usual the spring preload can be continuously tuned and the rebound can be set over an open-bleed system in 22 clicks. The shock absorber can be retrofitted with many other Wilbers accessories.
Product may vary from picture.

Note:
Hydraulic preload adjuster recommenend, otherwise not adjustable.

spring preload and rebound damping adjustable.

Downloads:
ABE
Please give a RAL-Number

chose your type:

Parameters in mm based on vehicle height
Height adjustment with lowering not possible
RAL
Here you can find an overview of the available colours

659.00€  *

Delivery time:  14 - 19 days
Amount:
In addition to this article, we recommend the following products:
We recommend the following accessories & spare parts for this article: