1. Your vehicle
Husqvarna | Norden 901 | HQV N | Model year
Please complete the product advice to see the relevant products!
Product information
The standard fork has a relatively poor response. In combination with the SKF oil seals, the Wilbers solution results in a significantly better response.
On the rear shock, the spring rate is adjusted via a slightly softer spring, in combination with optimised rebound and compression damping.
The suspension geometry on the front and rear axle was sensibly adjusted and optimised via the negative spring travel. As standard, the vehicle has increased negative spring deflections. These are adjusted by a slightly shorter suspension strut, so that the original seat height is retained.
All in all, this results in a better ride and improved handling, which contributes to a safer ride.
With this shock absorber the compression tank is connected to the shocks´ body by a flexible steel hose. Therefore it is an ideal alternative for road motorcycles with limited space. The hose can be placed individually where there is enough space for example on the rear frame where air flow can provide additional cooling. The adjustment screws for high- and low-speed compression, each tunable in 22 clicks, can be easily reached from the outside. Rebound can be modified by an open bleed system in 22 clicks and the preload is continuously adjustable.
Product may vary from picture.
On the rear shock, the spring rate is adjusted via a slightly softer spring, in combination with optimised rebound and compression damping.
The suspension geometry on the front and rear axle was sensibly adjusted and optimised via the negative spring travel. As standard, the vehicle has increased negative spring deflections. These are adjusted by a slightly shorter suspension strut, so that the original seat height is retained.
All in all, this results in a better ride and improved handling, which contributes to a safer ride.
With this shock absorber the compression tank is connected to the shocks´ body by a flexible steel hose. Therefore it is an ideal alternative for road motorcycles with limited space. The hose can be placed individually where there is enough space for example on the rear frame where air flow can provide additional cooling. The adjustment screws for high- and low-speed compression, each tunable in 22 clicks, can be easily reached from the outside. Rebound can be modified by an open bleed system in 22 clicks and the preload is continuously adjustable.
Product may vary from picture.
Special features of this product
Improvements over the standard equipment of your vehicle
+4
+5
+5
+5
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}