1. Your vehicle
Yamaha | MT-09 | RN69 | Model year
Please complete the product advice to see the relevant products!
Product information
The suspension solution from Wilbers Products realizes a better response of the fork. This is achieved by swapping the linear springs for progressive ones. The second spring rate provides a larger reserve.
On the rear axle the spring rate is adjusted by a slightly harder spring, in combination with optimized rebound and compression damping. Our solution offers a larger adjustment range than the original spring strut.
The suspension geometry on the front and rear axle was adjusted via negative spring travel.
The basic edition of the Wilbers Adjustline mono shock absorber comes along with the same technology as the more complex versions. The difference is that here we leave out the compression reservoir and thus the options for adjusting high- and low-speed compression. Nonetheless this shock absorber does not make any compromises concerning response behavior or durability. The radial piston, wet run, teflon guided self-aligning bearings and other features redefine the quality of a standard shock. Like usual the spring preload can be continuously tuned and the rebound can be set over an open-bleed system in 22 clicks. The shock absorber can be retrofitted with many other Wilbers accessories.
Product may vary from picture.
On the rear axle the spring rate is adjusted by a slightly harder spring, in combination with optimized rebound and compression damping. Our solution offers a larger adjustment range than the original spring strut.
The suspension geometry on the front and rear axle was adjusted via negative spring travel.
The basic edition of the Wilbers Adjustline mono shock absorber comes along with the same technology as the more complex versions. The difference is that here we leave out the compression reservoir and thus the options for adjusting high- and low-speed compression. Nonetheless this shock absorber does not make any compromises concerning response behavior or durability. The radial piston, wet run, teflon guided self-aligning bearings and other features redefine the quality of a standard shock. Like usual the spring preload can be continuously tuned and the rebound can be set over an open-bleed system in 22 clicks. The shock absorber can be retrofitted with many other Wilbers accessories.
Product may vary from picture.
Note:
Hydraulic spring preload recommended.
Special features of this product
Improvements over the standard equipment of your vehicle
+4
+5
+5
+5
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}