|
Wilbers Workshop Service: fork spring works
| Part-no. |
Part |
MRSP |
| 112-000-00 |
Fork installation and deinstallation without triple-trees / all fork types / per vehicle |
€ 99,- |
| 112-000-13 |
Fork service (original) including oil seals, fork oil, polishing of the tubes' inside / per fork |
€ 139,- |
| 112-000-30 |
Fork tube deinstallation and installation in all components / per piece |
€ 49,- |
| 112-000-31 |
Exchange of fork springs and oil / all fork types (parts not included) / complete fork |
€ 39,- |
| 112-000-32 |
Exchange of forks inner tube with an RSU fork / per piece |
€ 29,- |
| 112-000-33 |
Exchange of forks inner tube with an USD fork / per piece |
€ 49,- |
| 112-000-34 |
Deinstallation and installation of fork shaft seals and guidance / all fork types / per piece |
€ 39,- |
| 112-000-50 |
Exchange of inner tube and straightening of an RSU fork / per piece |
€ 59,- |
| 112-000-51 |
Polishing forks inner tube / per piece |
€ 19,- |
| 112-000-12 |
Fork test-run on the computerized test-stand including damping-protocol / per piece |
€ 29,- |
| 112-000-11 |
Straightening triple-trees / incl. measuring / without assembly and disassembly / per holm |
€ 49,- |
| 112-000-10 |
Fork measuring / only when dismounted / including protocol / per piece |
€ 39,- |
| 112-000-01 |
Triple-trees disassembley and assembly into the vehicle /per fork |
€ 149,- |
| 112-000-52 |
Preparing inner tube of an USD fork for anodizing incl. assembly and disassembly / price per set |
€ 149,- |
| 112-000-40 |
Fork lowering including cartridge shortening (BMW) (including all necessary parts and work ) / per fork |
€ 275,- |
| 112-000-14 |
Fork lowering (including all necessary parts and work) / per fork |
€ 225,- |
| 112-000-10 |
Fork tuning "Road" including fork springs, oil, oil seals, including polishing, modification of the guidance and play / per fork |
€ 299,- |
| 112-000-15 |
Fork tuning "Racetrack" including fork springs, oil, oil seals + setup tuning, including polishing, modification of the guidance and play, change of hydro-stop, piston conditioning / per fork |
€ 399,- |
| 112-000-99 |
Guarantee-works / per hour |
No charge |
| While a repair or remodelling process it occasionally happens, that smaller worn out parts are needed to be replaced by new parts, like shaft seals, o-rings or buffers, etc. In that case extra costs will apply. All work exclusive of spare parts costs, unless those are explicitly stated. |
Wilbers Workshop Service: suspension unit works
| Part-no. |
Part |
MRSP |
| 113-000-00 |
Disassembly and assembly of rear mono-shock into the vehicle / per piece |
€ 49,- |
| 113-000-01 |
Disassembly and assembly of rear front-shock into the vehicle / per piece |
€ 39,- |
| 113-000-02 |
Disassembly and assembly of TS stereo-shock absorber into the vehicle / per set |
€ 39,- |
| 113-000-03 |
Disassembly and assembly of front and rear set of stereo-shock absorber into a car / per set |
€ 149,- |
| 113-000-04 |
Disassembly and assembly of front and rear set of stereo-shock absorber into an ATV or Quad / per set |
€ 99,- |
| 113-000-10 |
Measuring OEM (original) shock, without disassembly and assembly / per piece |
€ 49,- |
| 113-000-11 |
Measuring the shock on our computerized test-stand with protocol / per piece |
€ 49,- |
| 113-000-30 |
Spring exchange / all types / per piece |
€ 9,90 |
| 113-000-20 |
Shock absorber service (Wilbers) without compression tank, including seal block, oil, nitrogen, piston-band, bumper, including polishing of piston rod / per piece |
€ 79,- |
| 113-000-21 |
Shock absorber service (Wilbers) with compression tank, including seal block, oil, nitrogen, piston-band, bumper, including polishing of piston rod / per piece |
€ 89,- |
| 113-000-25 |
Shock absorber service (WP White Power / Ohlins) without compression tank, including seal block, oil, nitrogen, piston-band, bumper, including polishing of piston rod / per piece |
€ 109,- |
| 113-000-27 |
Shock absorber service (WP White Power / Ohlins) with compression tank, including seal block, oil, nitrogen, piston-band, bumper, including polishing of piston rod / per piece |
€ 119,- |
| 113-000-26 |
Shock absorber service (WP White Power / Ohlins) with compression tank, including seal block, oil, nitrogen, piston-band, bumper, including polishing of piston rod / per piece |
€ 139,- |
| 113-000-23 |
Maintenance of Technoflex shock without tank, incl. seal block, oil and nitrogen (only from year of building 1998-2002) / per piece |
€ 49,- |
| 113-000-24 |
Maintenance of Technoflex shock with tank, incl. seal block, oil and nitrogen (only from year of building 1998-2002) / per piece |
€ 59,- |
| 113-000-50 |
Changing the shocks set-up (Wilbers) excl. service, with or without tank / incl. test-run / per piece |
€ 59,- |
| 113-000-51 |
Changing the shocks set-up (Wilbers) incl. service, with or without tank / incl. test-run / per piece |
€ 19,- |
| 113-000-31 |
Changing shocks´ length (Wilbers), incl. seal block, oil and nitrogen / per piece |
€ 99,- |
| 113-000-32 |
Changing shocks´ length (Wilbers), during a maintenance / incl. seal block, oil and nitrogen / per piece |
€ 39,- |
| 113-000-48 |
Retrofitting ABE during a maintenance, incl. ABE-Certificate / incl. shutter covers / per piece |
€ 25,- |
| 113-000-49 |
Retrofitting ABE without maintenance, incl. ABE-Certificate / incl. shutter covers / per piece |
€ 49,- |
| 113-000-60 |
Retrofitting hydraulic preload adjuster (Wilbers) / per piece |
€ 79,- |
| 113-000-66 |
Retrofitting hydraulic preload adjuster (Wilbers) during service, without material / per piece |
€ 39,- |
| 113-000-61 |
Retrofitting variable ride height adjuster (Wilbers) / per piece |
€ 79,- |
| 113-000-62 |
Retrofitting compression tank only with 631 and 641 (Wilbers) possible, without material / per piece |
€ 59,- |
| 113-000-99 |
Guarantee-works / per hour |
No charge |
| While a repair or remodelling process it occasionally happens, that smaller worn out parts are needed to be replaced by new parts, like shaft seals, o-rings or buffers, etc. In that case extra costs will apply. All work exclusive of spare parts costs, unless those are explicitly stated. |
Measuring and straightening frame / frame-parts
| Part-no. |
Part |
MRSP |
| 114-000-11 |
Measuring frame and rear end while disjointed, incl. protocol (Scheibner) / per piece |
€ 149,- |
| 114-000-10 |
Measuring frame and rear end while installed in the vehicle, incl. protocol (Scheibner) / per piece |
€ 199,- |
| 114-000-50 |
Straightening frame (cold) without welding / per piece |
€ 149,- |
| 114-000-51 |
Straightening frame (warm) incl. welding / per piece |
€ 249,- |
| 114-000-52 |
Straightening rear end, cold or warm / per piece |
€ 49,- |
| 115-000-00 |
Steering damper installation with Wilbers assembly kit / per piece |
€ 49,- |
| 116-000-00 |
Testing and adjusting all suspension elements in a vehicle, of all brands, in the Wilbers
Workshop in Nordhorn / appointment necessary / per vehicle |
€ 19,- |
| 117-000-00 |
All further works have to be calculated at cost, rate by hour |
€ 59,50 |
| While a repair or remodelling process it occasionally happens, that smaller worn out parts are needed to be replaced by new parts, like shaft seals, o-rings or buffers, etc. In that case extra costs will apply. All work exclusive of spare parts costs, unless those are explicitly stated. |
|
